If dialogue reaches your ears before or after the actors’ lips move, the problem may come from the TV, the connected audio system, or the video source.
These steps help you isolate the cause and correct audio delay without changing settings at random.
Check whether the delay affects every source
Start with a familiar scene that has clear speech, then compare the TV’s built-in speakers with your usual setup.
Test a second app or channel and, if possible, a device connected to another HDMI input.
- One channel or app only: The broadcast, stream, or app may be out of sync.
Try another program before adjusting the TV.
- One connected device only: Check that device’s audio output, cable, and settings.
- Every source through a soundbar or receiver: Focus on the external audio system and its connection to the TV.
- Every source, including TV speakers: Check the TV’s sound processing, audio format, and software.
Write down whether sound comes before or after the picture.
The direction matters: many sync controls can delay audio, while some A/V sync features delay the picture to catch up with audio.
Restart the TV and connected equipment
A temporary processing or HDMI handshake issue can sometimes clear with a full restart.
Turn off the TV, soundbar or receiver, and source device.
Unplug them from power for about a minute, then reconnect and turn them on.
If the equipment has a specific restart procedure in its manual, follow that procedure.
Play the same scene again.
If the sync problem returns immediately, continue with the connection and settings checks.
Adjust the audio delay or A/V sync setting
Look in the TV’s sound or audio output settings for a control named Audio Delay, Digital Output Audio Delay, Audio Sync, or A/V Sync.
The label and menu path vary by model, and some settings appear only when an external audio device is connected.
- Open the TV’s Settings menu and choose Sound or Audio.
- Find the sync or delay control for the active output, such as HDMI ARC/eARC or optical.
- Make a small adjustment, then replay the same dialogue scene.
- Repeat in small increments until the speech matches the picture.
If the sound is late, reducing a positive audio delay may help.
If the sound is early, a setting that delays audio can help.
However, some TVs use A/V sync to delay the picture instead.
Read the on-screen description and check the manual before making a large adjustment.
Sony’s official TV audio-sync troubleshooting guide explains that available settings and their effects differ across models.
Check the soundbar or receiver
Soundbars and home theater receivers may process surround sound, room correction, or other effects before playing it.
That processing can add latency.
Look in the external device’s settings for Audio Sync, AV Sync, Lip Sync, or Delay.
Change the setting gradually while testing the same scene.
If you use a digital optical cable, the external device may be the only place to adjust the delay.
Sony likewise recommends checking the home theater system’s audio/video sync setting when optical audio is in use.
Consult the manufacturer’s manual for the exact control and its direction.
Also test a less processing-intensive sound mode, such as Standard or Direct, if your soundbar or receiver offers one.
Turn off optional surround effects temporarily; if sync improves, re-enable them one at a time to identify the setting that adds delay.
Inspect HDMI ARC or eARC connections
For a soundbar connected over HDMI, make sure the cable runs between the TV’s port labeled ARC or eARC and the soundbar’s corresponding port.
A cable connected to a regular HDMI input may not carry TV audio as expected.
Reseat both ends and check for visible damage; if possible, try a known-good, compatible HDMI cable.
Turn HDMI-CEC off and back on only if the connection or device control is also behaving incorrectly, since the menu name varies by brand.
Restart both devices after changing the setting.
If the soundbar supports eARC but sync problems continue, try the connection options recommended by the TV and soundbar manuals; available formats and controls depend on the specific models.
Try PCM as a troubleshooting test
Complex audio formats can take longer to process than a basic stereo signal, especially when devices in the chain handle formats differently.
As a temporary test, set the TV’s digital audio output or the source device’s audio format to PCM or stereo PCM.
Then replay the same scene.
If PCM fixes the delay, the issue may involve audio format support or processing between the source, TV, and soundbar.
You can keep PCM if stereo sound is sufficient, or check each device’s manual for a compatible surround format and connection setup.
Changing to PCM may remove surround or object-based audio, so treat it as a diagnostic step rather than assuming it is the best permanent setting.
Sony’s official troubleshooting steps also recommend PCM in some HDMI audio-sync situations.
Check Bluetooth headphones and speakers
Bluetooth audio can arrive later than the picture because the TV and headphones must encode, transmit, and decode the signal.
If the TV offers a Bluetooth audio delay or sync adjustment, try it in small steps.
Headphones may also have a low-latency mode, but its availability depends on the model and Bluetooth codec support.
Compare Bluetooth with the TV speakers or a wired connection.
If only Bluetooth is delayed, the TV’s main audio path is probably not the cause.
Sony notes that Bluetooth devices can produce significant A/V delay and recommends TV speakers or wired HDMI or optical connections when delay is a problem; see its Bluetooth audio-delay guidance.
Update the TV, app, and connected devices
Check for software updates on the TV, streaming box, game console, soundbar, or receiver.
Updates can address compatibility or playback issues, but menu paths and update availability vary by manufacturer, model, and region.
Use the official support page or product manual for your device.
If the delay occurs in one streaming app, close and reopen it, check for an app update, and test another title.
If only one external player is affected, inspect that device’s audio output and any lip-sync setting before changing global TV settings.
Reduce extra video processing when needed
Some picture enhancements add processing time, while audio processing may add its own delay.
If the problem happens with a game console, enable the TV’s Game Mode for that input when available; it is designed to reduce picture processing.
For films and television, temporarily switch advanced picture or sound processing to a basic preset and test again.
Do not assume one universal setting fixes all sources.
A setting that helps a console can change the picture for a movie, and menu names differ by TV.
Restore any setting that does not improve sync.
When the delay persists
Test the TV speakers with all external audio devices disconnected.
If the picture and sound match on the speakers but not through the soundbar, focus on the soundbar, cable, format, or connection.
If the issue remains on the speakers across different apps and inputs, record the TV model, software version, affected sources, and whether the sound is early or late; those details help the manufacturer identify the right procedure.
As a final check, play the same scene using the TV speakers, then through the external system, and adjust only the sync control for the path that is out of time.
If the TV speakers are synchronized but the soundbar is not, consult the soundbar manual for its lip-sync setting and begin with a small adjustment.